Fox Tear down and Rebuild

[01Bullitt]

Well I have had 3 weeks of from work and this is what I have been doing with my buddy. He bought a 91 LX a few months back. It has a Vortec and about every imaginable bolt on and go fast part you can think of but he decided he wants to re-do the whole car and paint it and all that. So we began to tear it down and this is how far we have got in 2 days.

Here is what we began with

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00958Medium.jpg
http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00959Medium.jpg

[01Bullitt]

The tear down begins

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00960Medium.jpg

Me looking like im doing something

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00964Medium.jpg
http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00966Medium.jpg

[01Bullitt]

This is a reason he is redoing the car. He is sick of this mess

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00968Medium.jpg
http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00969Medium.jpg

My buddy under the car. Picture was taken through the transmission opening in the car.

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00970Medium.jpg

[01Bullitt]

Long tubes out
http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00972Medium.jpg

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00975Medium.jpg

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00976Medium.jpg

[01Bullitt]

Seats out

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00979Medium.jpg

Its almost out

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00981Medium.jpg

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00982Medium.jpg

Pulled the tranny out to help remove the engine

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00984Medium.jpg

[01Bullitt]

We are dirty as hell. Im just standing there doing nothing though

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00986Medium.jpg

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00987Medium.jpg

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00988Medium.jpg

[01Bullitt]

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00989Medium.jpg

TA-DA!!!!!!!

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00990Medium.jpg

SICCCCCC

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00991Medium.jpg

[01Bullitt]

Ive got a grease moustache

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00993Medium.jpg

We are damn proud

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00994Medium.jpg

End of the night on night 1

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00998Medium.jpg

[01Bullitt]

Day 2

We pulled out the rest of the wiring harness and I began to degrease.

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC01031Medium.jpg

Dash is gone

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC01034Medium.jpg

Table of parts

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC01035Medium.jpg

[01Bullitt]

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC01038Medium.jpg

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC01037Medium.jpg


End of night 2

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC01040Medium.jpg

[01Bullitt]

Before

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00998Medium.jpg

After

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC01040Medium.jpg


Tomorrow we will be sand blasting the engine bay and begining to fill all the holes to smooth out the bay. More pics to come.

[Ghost Rider]

Its almost out

http://img.photobucket.com/albums/v512/Djstorm100/Mustang%20restore/DSC00981Medium.jpg




Man, what part of the engine did that f*cking thing come out of???


lol @ the Hi Five...WTF

[nystangkid]

damn, got a hell of alot accomplished

[Pain Train79]

damn guys, you were hauling ass. good job and that will look great when you get it all cleaned up

[Ghost Rider]

oh yeah, nice job BTW bro

[87ttop_stang]

^ Wow, great job!

That is something I would love to do mine. My engine bay looks horrible.

[tango7]

Great progress... Are you welding the holes up??

[Niehaus5oh]

nice man... you guys work fast lol... and so happily too... haha

[TorchRed04GT]

Damn Nice job. I wish I had a project car like that.

[DropTopStang]

looks like everything is coming along awesome...I agree with torch..I wish i had a project like that...then again, I wish I had a friend that could help me...all of mine don't know crap about cars except how to put gas in it

[Ghost Rider]

^^^don't fool yourself dude, there are alot of people out there that don't even know how to do that...lol

seen this chick at the gas station not too long ago, man she didn't know what was going on...seriously, people that have never seen a gas station before could have done better, I was speechless

[DropTopStang]

^^^LMAO there was this stuck up chick back in high school, she got stranded like 40 miles from home and needed gas, and she called her dad to have him come pump the gas for her...spoiled bitch haha

[CrownVic98]

damn jeremy, you guys are really gettin into that. Looks good man. Is he changin the color or is it stayin the same

[01Bullitt]

he dosnt know what color he is going with yet. As for the holes in the engine bay he hasnt decided how he is going to fill those yet either.

[Ghost Rider]

whya are you filling them???

[01Bullitt]

cause there are about 200 holes in there and it looks stupid.

[Ghost Rider]

well, aren't you going to be using some of those holes to put shit back in???

My brothers car is the same way :dunno:

[GerRrg281]

looks like everything is coming along awesome...I agree with torch..I wish i had a project like that...then again, I wish I had a friend that could help me...all of mine don't know crap about cars except how to put gas in it

same here my friend.....same here

its depressing....try to talk cars to some of my friends and they are like, "why do you keep spending money on your car, its already fast as is" (in comparison to the 4 bangers they drive) hahaha

[01Bullitt]

well, aren't you going to be using some of those holes to put shit back in???

My brothers car is the same way :dunno:Actually he is trying to tuck most of the wires behind the fenders so %98 of the holes are not needed. He is just going to fill them all then if he needs one he will just get out a drill.

[GerRrg281]

oh, and the project looks like its coming along great....what are you guys planning on doing with it again?

[CrownVic98]

nice, wire tucks look great. As for filling the holes, grind the paint away and get some sort of copper to put behind the holes and weld around the holes. the weld will not stick to the copper but will stick to the fire wall. then grind them smooth and probelm solved.

[blueblazes]

i did all the wire hiding on my coupe and its completely worth it imo

[orange04mach1]

that looks like way to much work for me but it will be worth it

[87ttop_stang]

i did all the wire hiding on my coupe and its completely worth it imo

Not trying to hijack the thread, but do you have any pics?

I would like to see some pics, wire hiding might be another project I start on in the spring.

[01Bullitt]

Not trying to hijack the thread, but do you have any pics?

I would like to see some pics, wire hiding might be another project I start on in the spring.+1. I love to see clean engine bays

[tango7]

Go here and if you have a few hours to look there are some really nice shots of how guys did their engine bays.. There is a silver convert. that is amazing it is at the second to last page I think..
http://www.corral.net/forums/showthread.php?t=692716

[Niehaus5oh]

you can actually buy metal plates that you weld over the engine bay walls and what not... they look pretty nice and come in a kit that fit perfectly over everything...

[01Bullitt]

I just saw those metal plates in that thread. That is a damn good guy and my friend saw those to. I will have more pics up soon once we do a bit more work.

[Tourlexur]

who took all those pictures because obviously they didnt wanna get their hands dirty.

[01Bullitt]

who took all those pictures because obviously they didnt wanna get their hands dirty.
Brian....who else:guns:

[Djstorm100]

Hey guys, The coupe is my car. I've been member here but always lurking around.

This weekend we are going to continue working on it. I'm hoping to get the suspension off sand blast and paint what I can. Then try and start making some custom brake lines, and starting to weld up the holes.

[01Bullitt]

Hey guys, The coupe is my car. I've been member here but always lurking around.

This weekend we are going to continue working on it. I'm hoping to get the suspension off sand blast and paint what I can. Then try and start making some custom brake lines, and starting to weld up the holes.all with the help of me :burnout:

[87ttop_stang]

Hey guys, The coupe is my car. I've been member here but always lurking around.

This weekend we are going to continue working on it. I'm hoping to get the suspension off sand blast and paint what I can. Then try and start making some custom brake lines, and starting to weld up the holes.

Welcome to MX.com!

That is a nice Fox you've got there!

She will be even better once you finish your current project.

Please keep us updated as you progress.

[Tourlexur]

Brian....who else:guns:

as i was guessing

[Djstorm100]

Jeremy making the plates
http://img.photobucket.com/albums/v512/Djstorm100/DSC01099Small.jpg

Starting to lay down the first coat
http://img.photobucket.com/albums/v512/Djstorm100/DSC01108Small.jpg

http://img.photobucket.com/albums/v512/Djstorm100/DSC01109Small.jpg

[Djstorm100]

Filled the body holes
http://img.photobucket.com/albums/v512/Djstorm100/DSC01053Small.jpg
http://img.photobucket.com/albums/v512/Djstorm100/DSC01054Small.jpg


http://img.photobucket.com/albums/v512/Djstorm100/DSC01062Small.jpg
http://img.photobucket.com/albums/v512/Djstorm100/DSC01063Small.jpg

[Djstorm100]

http://img.photobucket.com/albums/v512/Djstorm100/DSC01066Small.jpg

Going to start cleaning and degreasing start to play down primer
http://img.photobucket.com/albums/v512/Djstorm100/DSC01092Small.jpg

Grinding and Shaping
http://img.photobucket.com/albums/v512/Djstorm100/DSC01095Small.jpg
http://img.photobucket.com/albums/v512/Djstorm100/DSC01102Small.jpg

[01Bullitt]

were getting there, haha

[DropTopStang]

damn guys, you've got it stripped down haha...great work so far! :thumbsup:

[87ttop_stang]

Wow, looks good!

Is it becoming more work than you originally anticipated?

[CrownVic98]

i think 98% of projects are more work than expected

[01Bullitt]

I think we expected a lot. But once you get into it you never know what you will find or how much more you will need to do. Its all good though and Im having fun with it....plus its not my money :)

[87ttop_stang]

i think 98% of projects are more work than expected

I have to agree with you on that!

....plus its not my money :)

LOL!!!

Well that makes a big difference!

[01Bullitt]

I have to agree with you on that!



LOL!!!

Well that makes a big difference!You guys know what is more fun then you would ever think......sandblasting. I sand blasted that A-Arm for about 30 minutes and it was awesome. Kinda like coloring or something haha.

[tango7]

So what did you guys use to fill the holes in.. looking good..

[CrownVic98]

try sandblasting titanium. it sparks. i must agree i love sandblasting and glass beading

[Djstorm100]

So what did you guys use to fill the holes in.. looking good..

POR-15 its their expoy.. they make great stuff

[Djstorm100]

Wow, looks good!

Is it becoming more work than you originally anticipated?

haha yea bc at first it was going to be.. pull the motor and clean the bay.. now the car is stripped haha

[Tourlexur]

So you're taking me for a ride in it when I get home right?

[87ttop_stang]

POR-15 its their expoy.. they make great stuff

Yes they do. The body shop where I had my subframes installed highly recommended their products.

Not trying to add to your workload, but have you considered (or did you already) filling in the holes across the top and front of the frame?

Like this:
http://i99.photobucket.com/albums/l299/Mesarina/Mustang%20GT/Engine%20rebuild/b4f1d5e1.jpg

The thread is on Corral.net at:
http://www.corral.net/forums/showthread.php?t=692716&page=46

There are some amazing engine bays on that thread!

[tango7]

POR-15 its their expoy.. they make great stuff

They say that stuff is the next best thing to welding..

[tango7]

Where did you get the Por-15, did you put something behind the holes to keep it from falling out??

[01Bullitt]

what he did was kinda make it mushroom on the back side. He would plung way to much through the hole then just spread it out on the back side. Once the body filler is put on I dont think that stuff is ever going anywhere.

[Djstorm100]

^ what he said

[Djstorm100]

So you're taking me for a ride in it when I get home right?

hell yea jimmy sure... if its done.. want to contribute to the funds?:cheers:

[Tourlexur]

hell yea jimmy sure... if its done.. want to contribute to the funds?:cheers:

**** no. I need to save for my own.

[01Bullitt]

**** no. I need to save for my own.why you got a sweet V6 at home.............................................. ......HAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHA:jest:

[Tourlexur]

why you got a sweet V6 at home.............................................. ......HAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHA:jest:

Dont you have some stairwells to go sweep?

[Tourlexur]

Or someone's toilet to unclogg

Free post ftw

[01Bullitt]

i dont do either of those things any more. Im not a groundskeeper anymore

[CrownVic98]

why you got a sweet V6 at home.............................................. ......HAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHA:jest:

ouch. whats even worse is it used to be yours:fyou:

[Tourlexur]

ouch. whats even worse is it used to be yours:fyou:

Lollercopter:burnout:

[CrownVic98]

ahhh the good ole days of jeremy and the sixer with flows

[Tourlexur]

DONT TAZE ME BRO :cursing:

[Djstorm100]

damn I can see the brotherly love haha

[01Bullitt]

updates and pictures to come

[CrownVic98]

so, ummm its tomorrow, where the hell are they jeremy

[Tourlexur]

so, ummm its tomorrow, where the hell are they jeremy

His pictures probably got fired to

[CrownVic98]

His pictures probably got fired to

:guns: damn you just owned him

[Tourlexur]

INCINIRATION!!!:pissed:

Sorry I've been watching Aqua Teen Hunger Force all day at work.

[VistaBlueGT]

yeah...ummmmm

its been a couple of days now...and still no pics...you suck bulitt...you lied to me...:crying:

[01Bullitt]

djstorm is taking new pics tonight to put up...at least thats what i was told

[CrownVic98]

INCINIRATION!!!:pissed:

Sorry I've been watching Aqua Teen Hunger Force all day at work.

Again, glad to see americas tax dollars at work:nono:

[Djstorm100]

These pics that are up are a little old (1-2 weeks) I'll get some more tomorrow as we are painting a truck and working on the stang a little.

[Tourlexur]

Again, glad to see americas tax dollars at work:nono:

I did how ever eat lunch with the Cardinals cheerleaders.

So far I've had breakfast with the cowboys cheerleaders and lunch with the Cardinals. Hows that for tax dollars at work.

[01Bullitt]

pics coming soon

[01Bullitt]

here is the engine bay from a week ago. It is now all smoothed out and in primer. I will have those pictures tomorrow.

http://img.photobucket.com/albums/v721/bmxriderhere/Fox%20Build/DSC01217Medium.jpg
http://img.photobucket.com/albums/v721/bmxriderhere/Fox%20Build/DSC01218Medium.jpg

Here is the underside in primer. We decided to use black primer and went back and did that then painted it semi gloss and it looks amazing. Those pictures tomorrow to.

http://img.photobucket.com/albums/v721/bmxriderhere/Fox%20Build/DSC01220Medium.jpg

[01Bullitt]

Here is the engine at the machine shop

http://img.photobucket.com/albums/v721/bmxriderhere/Fox%20Build/DSC01212Medium.jpg
http://img.photobucket.com/albums/v721/bmxriderhere/Fox%20Build/DSC01213Medium.jpg
http://img.photobucket.com/albums/v721/bmxriderhere/Fox%20Build/DSC01214Medium.jpg
http://img.photobucket.com/albums/v721/bmxriderhere/Fox%20Build/DSC01211Medium.jpg

[CrownVic98]

whats the motor getting done at the shop? i have those same valve covers, my uncle gave them to me.

[01Bullitt]

He was just getting the motor checked to see what kinda shape its in so he is basically refreshing it while adding a few goodies to it.

[CrownVic98]

i got ya, basically cleaning it up and checkin it out.

[Tourlexur]

Did dustin win the lottery or something?

[Djstorm100]

The motor will be "race spec" as in

balance, hone, decked, valve job, ported, mains bore and hone ect ect.. everything you can do just about

[01Bullitt]

http://img.photobucket.com/albums/v721/bmxriderhere/Fox%20Build/100_6028.jpg
http://img.photobucket.com/albums/v721/bmxriderhere/Fox%20Build/100_6030.jpg

and the underside

http://img.photobucket.com/albums/v721/bmxriderhere/Fox%20Build/100_6031.jpg
http://img.photobucket.com/albums/v721/bmxriderhere/Fox%20Build/100_6033.jpg

[Djstorm100]

http://img.photobucket.com/albums/v512/Djstorm100/DSC01255Medium.jpg
http://img.photobucket.com/albums/v512/Djstorm100/DSC01259Medium.jpg
http://img.photobucket.com/albums/v512/Djstorm100/DSC01256Medium.jpg
http://img.photobucket.com/albums/v512/Djstorm100/DSC01252Medium.jpg

[CrownVic98]

damn, this thing better be in MM&FF or 5.0 & SF when its done

[87ttop_stang]

That looks unbelievable!

Better than a new car, lol!

So you used rattle cans on the underside right?

[01Bullitt]

yup. Rustoleum primer then Rustoleum semi gloss. It took tons of cleaning to prep it right though

[87ttop_stang]

^ Oh I can tell man, but it looks excellent.

Makes me want to go out in the garage and start working on mine. Only problem is it is 20 degrees out right now, lol

I will start spraying mine in the spring.

[Djstorm100]

Thanks for the kind words guys.. Motor will be done in 2-3 weeks

[Djstorm100]

Bay is getting painted tomorrow

[87ttop_stang]

^ I may have missed this, but what color are you painting the car?

[VistaBlueGT]

I'z be done with the engine install before joooo...;)

[Djstorm100]

the stock red... may throw some candy in it.

Motor be done in 2 weeks :)

[Djstorm100]

http://img.photobucket.com/albums/v512/Djstorm100/DSC01307Medium.jpg



http://img.photobucket.com/albums/v512/Djstorm100/DSC01309Medium.jpg





http://img.photobucket.com/albums/v512/Djstorm100/DSC01310Medium.jpg

[87ttop_stang]

^ That looks nice dude!!!

[CrownVic98]

so jeremy, whats goin on with this. Any updates?

[01Bullitt]

we are in the process of putting things back together. Havent done anything major in about 2 months. We are hoping to at least get a rolling chassis by next weekend

[5Liter95]

What kinda bondo did you use? It looks like Rage Extreme in the pics..

And nice job on using guide coat, that helps out alot.. :thumbsup:

[01Bullitt]

no idea what they used, he had a guy come in and do the bay

[Djstorm100]

I have no idea what bondo it is...

Parts are being order and are on their way..its like Christmas all over again.

[Djstorm100]

Parts that are order ...all have came in other than the hard lines..back order until next week. about 2-3 weeks from now fuel system be tackled

* Master Cylinder adapter kit
* Brake Booster
* Fox Body Hard Brake Line Kit Stainless Steel
* 5 Lug Rear disk Brake Conversion (cobra)
* Master Cylinder
* Brake proportion valve
* Brake proportion valve plug
* Upper and Lower torque Boxes
* Ford rubber bushing rear end housing/c-clip/friction modifier
* Spring Insulators (front and rear)
* Ford Racing Control Arms ( I can get great deals on these)
* Windsheild Molding
* Steeda Firewall Adjuster

[CrownVic98]

sweet man. cant wait to see this come together

[Trevor04GT]

damn, im just looking at this. nice job man!!!

[Djstorm100]

Rear end is going up tomorrow, front end up wednesday/thursday. I'm having to work 2-3 hours because of the heat being in the 95+ in the afternoons

[Djstorm100]

rear end, brake lines, brake booster, master cylinder and alot of other shit are installed. Get pictures soon. The fu-ckstang is finally coming together, feels good to get something "big done"

[CrownVic98]

cant wait for pics man

[VistaBlueGT]

^^^+1...:banana:

[Djstorm100]

The Heart of the Beast


http://img.photobucket.com/albums/v512/Djstorm100/DSC01464-1.jpg










http://img.photobucket.com/albums/v512/Djstorm100/DSC01467.jpg














http://img.photobucket.com/albums/v512/Djstorm100/DSC01465.jpg

[01Bullitt]

sicccc

[87ttop_stang]

Wow, you guys have done some amazing work!

It is nice to see the beast coming together.

[Djstorm100]

http://img.photobucket.com/albums/v512/Djstorm100/DSC01479.jpg

http://img.photobucket.com/albums/v512/Djstorm100/DSC01480.jpg

http://img.photobucket.com/albums/v512/Djstorm100/DSC01475.jpg

[Djstorm100]

http://img.photobucket.com/albums/v512/Djstorm100/DSC01476.jpg

http://img.photobucket.com/albums/v512/Djstorm100/DSC01477.jpg

http://img.photobucket.com/albums/v512/Djstorm100/DSC01478.jpg

http://img.photobucket.com/albums/v512/Djstorm100/DSC01483-1.jpg

[Djstorm100]

http://img.photobucket.com/albums/v512/Djstorm100/DSC01486-1.jpg
http://img.photobucket.com/albums/v512/Djstorm100/DSC01487.jpg
http://img.photobucket.com/albums/v512/Djstorm100/DSC01488.jpg
http://img.photobucket.com/albums/v512/Djstorm100/DSC01489.jpg

[Djstorm100]

http://img.photobucket.com/albums/v512/Djstorm100/DSC01490.jpg

http://img.photobucket.com/albums/v512/Djstorm100/DSC01492.jpg
http://img.photobucket.com/albums/v512/Djstorm100/DSC01496.jpg
http://img.photobucket.com/albums/v512/Djstorm100/DSC01497.jpg

[Djstorm100]

So I went to drop in the motor today and Pops (dad) wasn't around. So in light of things my MOM helped me. She helped roll the stang out of the shop, so we could roll the motor in. Then rolled the stang back in to shop. She operated the engine hoist and basically lower the motor in, while i guide it. shes flippin awesome

http://img.photobucket.com/albums/v512/Djstorm100/DSC01500.jpg

http://img.photobucket.com/albums/v512/Djstorm100/DSC01502.jpg

http://img.photobucket.com/albums/v512/Djstorm100/DSC01503.jpg

http://img.photobucket.com/albums/v512/Djstorm100/DSC01504.jpg

[Djstorm100]

Thanks man! I been busy thats why I havent posted up pictures.. hope these will do for now.

[CrownVic98]

http://img.photobucket.com/albums/v512/Djstorm100/DSC01480.jpg


hmmmm
http://farm4.static.flickr.com/3085/2683238310_fdc6f4f81c_b.jpg


lmao its lookin good man. whats the specs on the motor, or was that covered already

[Jhrod]

glad to see things coming along.

[01Bullitt]

difference between my pic and robbies is that in my pic we had been working on the car for 4 hours, it was midnight and I was not aware a picture was about to be taken....

[Jhrod]

difference between my pic and robbies is that in my pic we had been working on the car for 4 hours, it was midnight and I was not aware a picture was about to be taken....

in a Cartman voice....... "Cleeeeeeeeeck

[CrownVic98]

difference between my pic and robbies is that in my pic we had been working on the car for 4 hours, it was midnight and I was not aware a picture was about to be taken.... i could tell by the look on your face. The fcat that i saw both of those pics posted the same day i just had to do it

[01Bullitt]

UPDATE!!!!

Dustin decided to go another route and he sold the Vortec and bought this

http://img.photobucket.com/albums/v512/Djstorm100/DSC01850.jpg

This week he got the Alternator put on and the belt. Along with some wiring. Last night I went over and we did a bunch of little things. We are hoping to have the car running in the next few weeks. Finishing fabbing up the turbo and wiring is what is basically holding it back now. He should be getting some black and red ford racing valve covers this week as well

[01Bullitt]

Next time I go out to his place (sometime this week), I will get tons of pictures for a full update on whats been done in the last few months.

[FOX ROD]

Nice! Stock block I assume? Should make some killer power when it's all said and done. Keep up the good work fellas.

[VistaBlueGT]

nice...:thumbsup:

[Djstorm100]

http://img.photobucket.com/albums/v512/Djstorm100/DSC01876.jpg

http://img.photobucket.com/albums/v512/Djstorm100/DSC00053.jpg

http://img.photobucket.com/albums/v512/Djstorm100/DSC00054.jpg

http://img.photobucket.com/albums/v512/Djstorm100/DSC00056.jpg