need a little info

[ibd14u2c]

I have a 06 saleen sc with center exhaust. it has magnaflow on it and i want 2 put flowmaster on it.It has 1 inlet (on each side 1 left and 1right muffler) and 2 outlets, 1 goes to the center exhaust and the other turns down on each muffler.My question is will this work with flows or do they make a muffler like this.And if they dont will this hurt anything using a flow with no turn down?Thanks 4 any advice.

[Cobra4me]

I have a 06 saleen sc with center exhaust. it has magnaflow on it and i want 2 put flowmaster on it.It has 1 inlet (on each side 1 left and 1right muffler) and 2 outlets, 1 goes to the center exhaust and the other turns down on each muffler.My question is will this work with flows or do they make a muffler like this.And if they dont will this hurt anything using a flow with no turn down?Thanks 4 any advice.are the magnaflows welded in. If not it may be as simple as changing out mufflers. Unfortunatlely I dont know alot about Saleens. Maybe Nino or one of the other guys can chime in and help with your question.

[ibd14u2c]

They are welded in,here is a pic.I just want to get them cut out and the flows welded in.

[Nino]

That's a real trick exhaust setup on those Saleens. If I'm not mistaken, isn't the short exit controlled by a valve?

-Nino

[ibd14u2c]

Not real sure, I know u can feel the exhaust coming out with your hand at idle. :dunno:

[Nino]

If there's no valve it will make it easier to transplant a new muffler in there. Basically you need a muffler with a single inlet and dual outlets, but you'll likely have to redo the center exhaust section to make it fit the new muffler. It's doable, you just have to find the right muffler.

Here's one muffler that may work. You just have to figure out if the inlet/outlet diameters will work.

http://www.flowmastermufflers.com/shop/images/9424402.jpg (http://www.flowmastermufflers.com/shop/index.php?main_page=product_info&cPath=0&products_id=3396&ab=9425400&recordID=&vehicle=&orig=9425400)

[Nino]

Here's another, probably more aggressive sound.

http://www.flowmastermufflers.com/shop/images/9425452.jpg (http://www.flowmastermufflers.com/shop/index.php?main_page=product_info&cPath=0&products_id=4179&ab=9425452&recordID=&vehicle=&orig=9425452)

[ibd14u2c]

Thanks 4 your help Nino,I will c what i can workout and let ya know how it turns out.:cheers: