PDA

View Full Version : Next Modz

Bullitt72
03-14-2008, 07:59 PM
Well the next mod for me is rear gear change to 4.10's. Hopfully it should be done in april or may for as i only have $300 saved so far and I only need $500. I was initially savin up for s/c but i'm just too impatient. Anyways, I wanted to get your opinion on other mods. I was thinking about a throttle body, or MAF. I was goin to go with pulleys too but I've been told many times its a waste of money since the Bullits already have special pulleys. Whats ya'lls take? Thanks.:burnout:
PONYBOY2001
03-14-2008, 08:31 PM
do 3:73's...i wish i did..
blueblazes
03-14-2008, 08:33 PM
if the stock maf is not pegged there is no point in changing it as it will require a retune
and pulleys are a waste on a modular
TorchRed04GT
03-14-2008, 08:41 PM
get the 4.10s
Bullitt72
03-14-2008, 09:21 PM
why 3.73? Everyones saying 4.10's. Im' gettin confused. please elaborate. thanks.
PONYBOY2001
03-14-2008, 09:42 PM
why 3.73? Everyones saying 4.10's. Im' gettin confused. please elaborate. thanks.

because you are thinking s/c 3:73 gives you more gear...my 4:10's with blower i run out of gear real quik..:crying:
CrownVic98
03-14-2008, 11:51 PM
do you have a CAI, ifnot get a JLT along with a 70mm TB and a hand held tuner or custom tune and you will be very pleased
TorqueO
03-15-2008, 01:00 AM
3:73's and a centri would be a nice street machine. If you want a quarter mile runner go with the 4:10's but you will need a taller tire so you wont run out of gear. CAI, 3:73 gears, and a 75mm TB with a upper plenum would be good. Steeda pulleys are dyno proven for 4 / 5 horse at the wheels, but you will need to put your old ones back on if you are gonna get the supercharger. So the pulleys would be a waste to get
blownstang
03-15-2008, 10:55 PM
do you have a CAI, ifnot get a JLT along with a 70mm TB and a hand held tuner or custom tune and you will be very pleased

agree
CrownVic98
03-18-2008, 12:00 AM
3:73's and a centri would be a nice street machine. If you want a quarter mile runner go with the 4:10's but you will need a taller tire so you wont run out of gear. CAI, 3:73 gears, and a 75mm TB with a upper plenum would be good. Steeda pulleys are dyno proven for 4 / 5 horse at the wheels, but you will need to put your old ones back on if you are gonna get the supercharger. So the pulleys would be a waste to get
he doesnt need to have an upper plenum. hes got the bullit intake already
TorqueO
03-18-2008, 12:43 AM
It wasn't in his first post in this thread and so if he does that's cool. Didn't know that, so he would just ignore the upper plenum mentioning, no big deal. Just noticed he has a bullit